您好,欢迎光临莱州聚峰机械有限公司网站! 郑重声明 购机 售后 聚峰官微

全国咨询热线

400-879-1999

您的位置: 首页 > 新闻资讯 > 合作资讯
卧式搅拌机有什么方法会更干净?
来源:https://www.cnzkjf.com/ 日期:2020-04-28
  随着工业的发展,我们的自动化设备的发展还是很好的,在一些行业中,使用的频率还是相当高的,卧式搅拌机就是其中之一,那么卧式搅拌机有什么方法会更干净呢?
  With the development of industry, the development of our automation equipment is still very good. In some industries, the frequency of use is still quite high. The horizontal mixer is one of them, so what method can the horizontal mixer be cleaner?
  卧式混合机是一种混合速度高、残渣少的设备。还可广泛用于塑料颗粒、塑料粉末、化工粉末、涂料、硅藻土、粉末、粉末等粉末。本实用新型的特点是:双螺旋结构,两边的材料由双方中间一个大螺旋推动,中间材料通过小螺旋带推动两岸,除了混合粉,也可以加入液体燃料,根据需要添加喷雾装置,并通过空气压力原理驱动卧式搅拌器的顶部,然后液体喷嘴。
  Horizontal mixer is a kind of equipment with high mixing speed and less residue. It can also be widely used in plastic particles, plastic powder, chemical powder, coating, diatomite, powder, powder and other powder. The utility model is characterized by that the double helix structure is driven by a large spiral in the middle of the two sides, and the intermediate material is used to push the two sides through the small spiral belt. Besides mixing powder, liquid fuel can be added, and the spray device is added according to the requirement, and the top of the horizontal agitator is driven by the air pressure principle, and then the liquid nozzle is used.
中科聚峰搅拌机
  卧式搅拌机其实有多种卸料方式,从底部卸料,有的公司从侧面卸料,有的从其他部位卸料,还有螺旋卸料机,那么哪种卸料方式会减少残留物,这是我们应该注意的。
  In fact, there are many unloading methods for horizontal mixers, such as unloading from the bottom, some companies from the side, some from other parts, and screw unloaders. Which unloading method will reduce the residue? This is what we should pay attention to.
  把权力,事实上,通常与墙之间的带隙和卧式搅拌器,然而,差距越小,放电越多,如果好的物流,物流自然放电,放电快速、干净,如果材料粘性或超细粉末,流动性粉末流量将是缓慢的,必须通过内部辐射带,材料与材料之间的差距是不允许启动丝带时,并没有足够的材料来推动它,它将被保留下来,在这种情况下,残留物会增加。
  The power, in fact, is usually connected with the band gap between the wall and the horizontal stirrer. However, the smaller the gap, the more the discharge. If the good logistics and logistics discharge naturally, the discharge is fast and clean. If the material is sticky or ultrafine powder, the flow of the flowing powder will be slow, and it must pass through the internal radiation band. The gap between the material and the material is not allowed to start the ribbon, There is not enough material to push it, it will be retained, in which case the residue will increase.
  以上是小编为你介绍的卧式搅拌机有哪些方法会比较干净,希望对你有所帮助,如果你有其他方面的了解,可以咨询我们。
  The above is a small series for you to introduce the horizontal mixer which methods will be cleaner, hope to help you, if you have other aspects of understanding, you can consult us.