混凝土搅拌机是把水泥、砂石骨料和水混兼并拌制成混凝土混合料的机械。主要由拌筒、加料和卸料组织、供水系统、原动机、传动组织、机架和支承设备等组成。下面呢
中科聚峰的小编给大家收集整理了混凝土搅拌机的操作过程与注意事项。
Concrete mixer is a kind of machinery which mixes cement, aggregate and water into concrete mixture. It is mainly composed of mixing drum, feeding and unloading organization, water supply system, prime mover, transmission organization, frame and supporting equipment. The following is a small compilation of zhongkejufeng to collect and sort out the operation process and precautions of the concrete mixer.
一、混凝土搅拌机操作过程
1、 Operation process of concrete mixer
1、将立柱上的功用切换开关，拨到“主动”方位，按下控制器上的发动开关，整个运转程序将自行主动控制运转。
1. Turn the function switch on the column to the "active" position, press the start switch on the controller, and the whole operation program will automatically control the operation.
2、全过程运转结束后主动中止，在运转工程中如需中途停机，可按下中止钮然后可重新发动。
2. After the whole process is completed, it will be stopped actively. If it is necessary to stop halfway in the operation project, it can be restarted after pressing the stop button.
3、按下发动按钮后，显示屏即开端显示时刻、慢速、加砂、快速、中止、快速、运转指示灯按时闪亮。
3. After pressing the start button, the display will start to show the time, slow speed, sanding, fast, stop, fast, and the operation indicator will flash on time.
4、主动控制时，有必要把手动功用的开关悉数拨到停的方位。
4. In active control, it is necessary to turn all the switches of manual functions to the stop position.
二、混凝土搅拌机注意事项
2、 Precautions for concrete mixer
1、用测量规检测叶片与锅壁之间的间隙应为3mm±2mm，若间隙超差时，可调节叶片的上下方位来达到规定规模。
1. The gap between the blade and the wall of the boiler shall be 3mm ± 2mm by measuring gauge. If the gap is out of tolerance, the upper and lower directions of the blade can be adjusted to reach the specified scale.
2、每次使用后对搅拌叶、锅应及时清理干净，电器部分应防止剧烈轰动，远离水和高温，注意防尘。
2. After each use, the mixing leaves and pots shall be cleaned up in time, and the electrical parts shall be kept away from violent sensation, water and high temperature, and dust prevention.
3、运转中禁止维修保养。维修保养搅拌机，有必要拉闸断电，锁好电闸箱，挂好“有人作业禁止合闸”牌，并派专人监护。
3. Maintenance is prohibited during operation. For the maintenance of the mixer, it is necessary to switch off the power, lock the switch box, hang the "no switching on when someone is working" sign, and assign a special person for supervision.
