您好,欢迎光临莱州聚峰机械有限公司网站! 郑重声明 购机 售后 聚峰官微

全国咨询热线

400-879-1999

您的位置: 首页 > 新闻资讯 > 合作资讯
如何保养自动上料搅拌车的变速箱
来源:https://www.cnzkjf.com/ 日期:2020-02-26
  1.正确把握自动上料搅拌车变速箱油的使用周期,定期更换。一般情况下,大多数厂家都会建议变速器换油周期一般为2年或4万6万。当使用车主朋友保持传动油的清洁,因为变速箱油使用很长一段时间后会发生油垢,可能会形成污泥,会增加摩擦磨损的部分,还会使身体运动的阀体,液压控制,使自动混合汽车变速器异常。
  1. Correctly grasp the service cycle of the gearbox oil of the automatic feeding mixer and replace it regularly. In general, most manufacturers will recommend that the oil change period of the transmission is generally 2 years or 40000-60000 km. When users keep the transmission oil clean, because the transmission oil will produce oil dirt after a long time of use, which may form sludge, increase the friction and wear parts, and make the body movement of the valve body, hydraulic control, so that the automatic hybrid vehicle transmission is abnormal.
  2、经常检查变速器油位是否正常。检查传动油需要预热50℃左右,然后把杆在每一站停车后2秒,目前正常的油位应位于和之间的线,如果没有达到,应及时添加相同的油质量。
自动上料搅拌车
  2. Check the transmission oil level regularly. Check that the transmission oil needs to be preheated to about 50 ℃, and then the lever stops at each station for 2 seconds. At present, the normal oil level should be in the line between the highest and the lowest. If not, the same oil quality should be added in time.
  3.正确更换变速箱油。动态换油目前更提倡换油的方法,选择特殊的齿轮箱清洗设备,在传播的过程中工作,旧的油将完整的循环,排出干净然后参与新变速器油,这样换油率高达90,以确保的换油。
  3. Replace the transmission oil correctly. At present, dynamic oil change is more advocated. Special gear box cleaning equipment is selected to work in the process of transmission. The old oil will be completely circulated, drained and then participate in the new transmission oil. In this way, the oil change rate is as high as 90 to ensure efficient oil change.
  如何保养自动上料混合机的变速箱
  How to maintain the gearbox of automatic feeding mixer4,还有不要删除变速箱,变速箱的装配,精确部署后的制造商,包括每个螺丝的位置和紧张是一个技术参数,如果我们手动删除,很难安装初始位置,这必然会增加变速箱的磨损。需要维修的变速箱必须到底盘厂家的维修服务站,由的维修人员来操作。
  4. Do not delete the gearbox. The assembly of the gearbox, the manufacturer after precise deployment, including the position and tension of each screw is a technical parameter. If we delete it manually, it is difficult to install the initial position, which will inevitably increase the wear of the gearbox. The gearbox to be repaired must go to the maintenance service station of chassis manufacturer and be operated by professional maintenance personnel.
  根据以上四点,驾驶员可以对自动上料混凝土搅拌机的变速箱进行日常维护,延长其使用寿命。
  According to the above four points, the driver can carry out daily maintenance on the gearbox of the automatic feeding concrete mixer to extend its service life.
  以上是中科聚峰厂家为大家介绍的如何保养自动上料搅拌车的变速箱的相关内容,想要了解更多内容,欢迎访问网站:https://www.cnzkjf.comThe above is about how to maintain the gearbox of the automatic loading mixer introduced by the manufacturer of Zhongke Jufeng. For more information, please visit the website: https://www.cnzkjf.com