The tank body is made of 6mm alloy steel manganese steel, which has higher strength and more wear-resistant blades
Assembly line production, overall assembly of mixing drum, welder assembly equipment to ensure product quality, full-automatic circumferential seam and longitudinal seam, which are unmatched by small factories.
The tank head adopts automatic edging machine for edging, and the internal and external butt joints are fully welded and thickened to 8mm.
The hydraulic system adopts German Rexroth hydraulic pump and rongjiao reducer; Sali hydraulic pump, hydraulic motor, Italian PMP cycloid pinwheel reducer, imported with original packaging, non OEM products.
The internal blade is made of 5mm fine grain alloy steel and designed and formed by UG and CAD computer simulation technology. It is redesigned by technicians in combination with national regulations and the style of Japanese school and European and American school. The angle is reasonable, the mixing is more uniform, and the residual rate of unloading is lower, which improves the current situation of uneven mixing of stones and cement and easy wear of blades in the traditional mixing process; Feed speed & gt; 3.8m3/min, discharge speed & gt; 3m3 / min, residue rate & lt; 0.2%。
Design features of cement mixer truck:
Low inclination design: the inclination is 5% lower and the safety factor is 10% higher than that of similar mixers; The design of feeding and discharging ports is reasonable, the feeding and discharging speed is fast, and the operation is simple
Mixing drum: the adopted mixing drum is a widely used structural form. The mixing blade adopts three-dimensional double spiral mixing design, and the residual rate is as low as 0.6%, which is 2% higher than the international standard and 0.7% - 1% higher than the industry standard.
Transmission system: the driving mode of the mixing drum is to take the engine as the power source, take the power from the power take-off at the rear end of the engine, transmit it to the hydraulic pump through the transmission shaft, and drive the mixing drum to rotate through the motor reducer
Control system: the control system controls the forward, reverse and rotational speed of the mixing drum through the left and right control levers at the rear of the vehicle, so as to complete the feeding, discharging and mixing actions
Water supply system: the water supply system of the mixer truck is mainly used to clean the mixing tank and its surface. The water supply system is mainly supplied by the pressure water tank, and the water pressure can reach 0.6-0.8mpa.