自动上料搅拌车异常运行
Abnormal operation of automatic feeding mixer
需要注意自动上料搅拌车的异常运行吗？
Do you need to pay attention to the abnormal operation of the automatic feeding mixer?
自动上料搅拌车是一种特殊的重型卡车。混合燃料箱时，其载荷大，路况复杂，惯性离心力大，对自动上料搅拌车的制动系统提出了很高的要求。尽管制动系统对于混合器系统非常重要，但在确定混合器的安性时要考虑的是轿厢的制动距离和制动器的热降解。
Automatic loading mixer truck is a special heavy truck. When mixing fuel tank, it has large load, complex road conditions and large inertial centrifugal force, which puts forward high requirements for the braking system of automatic loading mixer. Although the braking system is very important for the mixer system, the first consideration in determining the safety of the mixer is the braking distance of the car and the thermal degradation of the brake.
如果卡车的制动系统出现问题，驾驶员和乘客也将面临危险。因此，在驾驶或踩刹车时，需要注意刹车。
If there is a problem with the braking system of the truck, the driver and passengers will also be at risk. Therefore, when driving or stepping on the brake, you need to pay attention to the brake.
1.制动时发出异常声音
1. Abnormal sound during braking
踩刹车时，刹车系统会产生剧烈的金属摩擦。
When you step on the brake, the brake system will produce severe metal friction.
这可能是由于刹车片中的异物，刹车盘上的锈蚀等引起的。
This may be caused by foreign matters in the brake pad and corrosion on the brake disc.
2.刹车踏板行程变长
2. The brake pedal travel becomes longer
刹车松开时，您会看到一个直的白点。
When the brake is released, you will see a straight white dot.
较长的制动行程的原因主要是由于空气进入制动系统，缺少制动油，可能的泄漏以及制动衬块的严重磨损。
The reason for the long braking stroke is mainly due to the air entering the braking system, lack of brake oil, possible leakage and serious wear of brake pads.
3.制动偏差
3. Braking deviation
制动偏差不是很常见，主要反映了在施加制动时方向盘偏向一侧的事实。
Braking deviation is not very common, which mainly reflects the fact that the steering wheel is biased to one side when braking is applied.
这种现象的原因可能是制动衬块的偏心磨损和制动缸的问题。
This phenomenon may be caused by eccentric wear of brake pads and problems of brake cylinders.
4.刹车越来越难
4. Braking is becoming more and more difficult
许多卡都有增加刹车的问题。加强制动器的主要原因是真空助力器的故障。没有辅助制动，经常使用制动。
Many cards have the problem of adding brakes. The main reason for strengthening the brake is the failure of the vacuum booster. There is no auxiliary braking, and the braking is often used.
5.刹车的
5. Braking
许多卡伙伴都遇到了这种情况，但是在应用制动器时，会出现上肢弹回制动踏板的现象，这主要是由于制动盘表面不平整所致。垫片和钢圈变形。
Many card partners encounter this situation, but when applying the brake, the upper limb will bounce back to the brake pedal, which is mainly due to the uneven surface of the brake disc. The gasket and steel ring are deformed.
Among the highlights of this article, kejufeng mixer provides knowledge. There are many wonderful contents on this website. You can click to enter more contents: https://www.cnzkjf.com We have special customer service to answer your questions
