When the concrete mixer truck is used for a certain period of time, too much or too little, the mixing cylinder will not rotate. 2. Hydraulic system or engine failure; 3. Motor failure. Don't worry about these things. Teach you how to deal with:

　　1. 混凝土在运输过程中被卡住;清理干净就没有问题了;

　　1. The concrete is stuck during transportation; there is no problem if it is cleaned up;

　　2. 液压系统或发动机故障处理:

　　2. Troubleshooting of hydraulic system or engine:

　　1)打开搅拌桶人孔盖，松开马达上高压软管的管接头，旋转搅拌桶使搅拌桶人孔斜向下，从搅拌桶人孔排出混凝土;2)将麻烦卡车高压软管从救济的电动机用高压软管连接到另一端的油泵救援车,将用于紧急回水管有麻烦卡车机油口、回油管另一端用泵抽油口后救援车辆,使用救援车来控制麻烦卡车的旋转圆柱,具体的排放。

　　1) Open the manhole cover of the mixing barrel, loosen the pipe joint of the high-pressure hose on the motor, rotate the mixing barrel to make the manhole of the mixing barrel incline downward and discharge the concrete from the manhole of the mixing barrel; 2) connect the high-pressure hose of the troublesome truck from the relief motor to the oil pump rescue truck at the other end with the high-pressure hose, At last, the rescue vehicle behind the pump pumping port will be used at the other end of the oil return pipe of the troubled truck, and the rescue vehicle will be used to control the rotating cylinder of the troubled truck, with specific discharge.

　　3、电机故障，处理相对简单，可将电机从救援车上拆下安装在故障车上，然后将各油管连接起来，启动救援车时可将混凝土气缸混出。

　　3. The treatment of motor failure is relatively simple. The motor can be removed from the rescue vehicle and installed on the failure vehicle, and then the oil pipes can be connected. When the rescue vehicle is started, the concrete cylinder can be mixed out.

　　当出现故障时，应判断故障原因，并采取有效措施搅拌筒内的混凝土。

　　In case of failure, the cause of failure shall be determined and effective measures shall be taken to remove the concrete in the mixing drum.

　　以上就是对中科聚峰搅拌车特殊情况的措施的详细介绍，想要了解更多请点击官网https://www.cnzkjf.com

　　The above is a detailed introduction of the solutions to the special situation of Zhongke Jufeng mixer. For more information, please click https://www.cnzkjf.com