您好,欢迎光临莱州聚峰机械有限公司网站! 郑重声明 购机 售后 聚峰官微

全国咨询热线

400-879-1999

您的位置: 首页 > 售后支持 > 常见问题
你的搅拌车好不好要看哪些?
来源:https://www.cnzkjf.com/ 日期:2021-08-04
1,容积
1. Volume
搅拌车的容积是一个基本参数,容积越大,装载的混凝土越多,搅拌车的也越贵。根据购车目的来选择不同容积的搅拌车。如果按每立方混凝土进行运输,则选择大容量的搅拌车更好;如果是包月运输,10方搅拌车就可以满足基本需求。
The volume of mixer truck is a basic parameter. The larger the volume is, the more concrete is loaded, and the more expensive the price of mixer truck is. Mixer trucks with different volumes shall be selected according to the purpose of purchase. If it is transported according to the cost per cubic meter of concrete, it is better to choose a large-capacity mixer; In case of monthly transportation, 10m3 mixer truck can meet the basic needs.
2,后桥
2. Rear axle
一般车主购买搅拌车不会关注到这个方面,只有少数内行的车主才会注意到这个。如果运输途中路面比较平坦,基本都是走公路,可以选择单级减速桥。如果路况不是很好,有很多石头或者坡道,建议选择轮边减速桥,这样车子的扭矩比较大,适合爬坡。
General car owners will not pay attention to this aspect when buying mixer cars. Only a few expert car owners will pay attention to this aspect. If the road surface is relatively flat during transportation and basically takes the highway, you can choose a single-stage deceleration bridge. If the road condition is not very good and there are many stones or ramps, it is recommended to choose the wheel side deceleration bridge, so that the car has a large torque and is suitable for climbing.
中科聚峰搅拌机
3,轮胎
3. Tire
混凝土搅拌车轮胎的规格有好几种,大车配大胎,小车配小胎,基本不会错。主要是轮胎材质分为尼龙胎和钢丝胎,钢丝胎的寿命是尼龙胎的2倍,也高出很多。有的车是原厂配的钢丝胎,有的是尼龙胎,顾客在选购时要先问清楚这款车是原厂配的钢丝胎还是尼龙胎。
There are several specifications of tires for concrete mixer truck. The big car is equipped with big tires and the small car is equipped with small tires. Basically, there will be no mistake. Mainly, the tire material is divided into nylon tire and steel tire. The service life of steel tire is twice that of nylon tire, and the price is much higher. Some cars have original steel tires and some have nylon tires. Customers should first ask whether this car is original steel tires or nylon tires.
4,罐体质量
4. Tank mass
搅拌车罐体的质量主要是指罐体的厚度,现在一般是6mm的锰板,若低于这个厚度建议不要考虑。
The quality of mixer tank mainly refers to the thickness of the tank. Now it is generally 6mm manganese plate. If it is lower than this thickness, it is recommended not to consider it.
5,底盘
5. Chassis
搅拌车底盘的选择很多,每一款底盘都有它的优劣势,选择哪一款还要看个人的喜好,建议从企业、、口碑等多个方面综合考虑。
There are many choices of mixer chassis. Each chassis has its advantages and disadvantages. Which one to choose depends on personal preferences. It is recommended to consider comprehensively from the aspects of brand, price, reputation and so on.
以上的精彩内容来自:中科搅拌机提供分享,更多的精彩内容请点击进入我们的网站:https://www.cnzkjf.com,我们会有更多的精彩内容等您查看
The above wonderful contents are shared by Zhongke mixer. For more wonderful contents, please click to enter our website: https://www.cnzkjf.com , we will have more wonderful content for you to see