The headlamp bulb of automatic concrete feeding mixer needs to be replaced regularly. When driving for a certain period of time, the brightness of the lights will be weakened. At this time, for the life of you and others, we must carry out testing and maintenance.

混凝土自动上料搅拌车年检时，会检测车灯光束位置是否正确。正确的光束位置会让视野更清楚，行车更加，其实在车灯出现问题时，并不一定非要去服务站进行调整，自己动手也很轻松，而且充满乐趣。

During the annual inspection of the automatic concrete feeding mixer, whether the position of the light beam is correct will be detected. The correct beam position will make the vision clearer and driving safer. In fact, when there is a problem with the light, you don't have to go to the service station to adjust it. It's very easy and fun to do it yourself.

一、选择昏暗的环境，比如地下停车瞅者夜晚，将搅拌车的车头正对一堵墙停放，车头与墙体尽量对正，相距5、6米左右;

1、 Choose a dark environment, such as underground parking. At night, park the mixer truck with the front facing a wall, and the front facing the wall as far as possible, with a distance of about 5 or 6 meters;

二、打开车灯，用不透光的厚布遮住一个车灯，单独调节每一个大灯。为了保证搅拌车的

2、 Turn on the lamp, cover one lamp with a thick opaque cloth, and adjust each headlamp separately. In order to ensure the stability of the mixer
           

三、将搅拌车的车灯在墙面的光照范围用记号笔或粉笔做一个标记，同时在车标位置对应的墙面处也做一个标记。分别测量两侧搅拌车的车灯记号与位置的距离，两个距离应该相等。如果发生向外或者向内偏的现象，则应该看一下搅拌车使用说明书，用螺丝刀进行细微调节，使得两个车灯的位置左右对称;

3、 Mark the lamp of the mixer truck with a marker or chalk in the center of the illumination range of the wall, and also make a mark on the wall corresponding to the logo position. Measure the distance between the lamp mark and the center of the mixer on both sides, and the two distances should be equal. If the phenomenon of outward or inward deviation occurs, you should read the operation manual of the mixer, and use a screwdriver to make the position of the two lamps symmetrical;

四、调节光束的高度，右侧搅拌车的车灯应该完全水平直射，左搅拌车的车灯则向上调高10cm左右，但是不要调得太高，以免灯光直射对面来车司机的眼睛。而右侧车灯的照射范围则可以向右偏一些，以提高搅拌车右侧的可见度。

4、 Adjust the height of the light beam. The light on the right side of the mixer should be straight horizontally, while the light on the left side of the mixer should be raised about 10cm, but not too high, so as not to direct the light on the driver's eyes. However, the illumination range of the right lamp can be shifted to the right to improve the visibility of the right side of the mixer.

以上就是有关怎样检测混凝土自动上料搅拌车车灯的方法，希望能对你有所帮助。

The above is about how to detect the concrete automatic feeding mixer lamp method, hope to help you.