搅拌机发生堵塞问题要怎样处理？
How to deal with the blockage of Zhongke mixer?
1.每次充电前，用水冲洗进水口，以在进水期间保持进水口湿润。
1. Before each charging, flush the water inlet with water to keep the water inlet wet during water inlet.
2.装载时，将装在车辆上的清洗水箱注满水。
2. When loading, fill the washing water tank installed on the vehicle with water.
3.充电后，冲洗入口并清洁入口附近的混凝土。
3. After charging, flush the inlet and clean the concrete near the inlet.
4.在施工现场卸货后，冲洗排水箱，然后向混凝土储水箱中添加30-40L的清洗水；在车辆返回过程中，保持混凝土储罐缓慢旋转。
4. After unloading at the construction site, flush the drainage tank, and then add 30-40l of cleaning water to the concrete storage tank; Keep the concrete tank rotating slowly during vehicle return.
5.下次装载之前，请记住要从混凝土储罐中排出污水。
5. Before the next loading, please remember to drain the sewage from the concrete storage tank.
6.每天完全清洁混凝土储罐和机器的入口和出口。中科搅拌机的清洁点可确保没有水泥和混凝土结块。
6. Completely clean the inlet and outlet of concrete storage tank and machine every day. The cleaning point of Zhongke mixer can ensure that there is no cement and concrete caking.
中科搅拌机堵塞情况的处理步骤就是这些，希望对你有帮助。
These are the steps to deal with the blockage of Zhongke mixer. I hope it will be helpful to you.
The above is the knowledge brought to you today. Zhongke mixer has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: https://www.cnzkjf.com
